Wire turning is the process of achieving the machining purpose by rotating the cutting tool on the workpiece so that it cuts and removes the material on the workpiece. Wire turning is generally achieved by adjusting the position and angle of the turning tool, cutting speed, depth of cut and other parameters to achieve the processing requirements.
Processing Flow of Wire Turning
The process of steel pipe wire turning includes the steps of material preparation, preparation of the lathe, clamping the workpiece, adjusting the turning tool, wire turning, inspection and improvement. In actual operation, it is also necessary to make appropriate adjustments and improvements according to the actual situation, in order to improve the efficiency and quality of wire turning processing.
Quality inspection of wire turning processing
The quality inspection of steel pipe wire turning is very important, including wire size, surface finish, parallelism, perpendicularity, etc., to ensure the quality of processing through these tests.
Common problems of wire turning
1. Lathe debugging problems: before turning wire processing, the need for lathe debugging, including workpiece clamping, tool installation, tool angle and other aspects. If the debugging is not appropriate, it may lead to poor workpiece processing, and even damage to the tool and equipment.
2. Processing parameter setting problem: turning wire processing needs to set some parameters, such as cutting speed, feed, depth of cut, etc.. If the parameters are not set properly, it may lead to rough surface of the workpiece, poor machining quality, or tool damage and other problems.
3. Tool selection and grinding problems: tool selection and grinding is an important part of wire turning, selecting the right tool and the right grinding method can improve the efficiency and quality of wire turning. If improperly selected or improperly ground, it may lead to tool damage, processing inefficiency and other problems.
4. Workpiece clamping: workpiece clamping is an important part of wire turning, if the workpiece is not firmly clamped, it may lead to workpiece displacement, vibration and other problems, thus affecting the processing effect.
5. Environmental and safety issues: turning wire processing needs to ensure environmental safety and good working conditions, to prevent dust, oil and other harmful substances on the human body and equipment damage, and at the same time need to pay attention to the maintenance and repair of equipment to ensure the normal operation of the equipment.
Post time: Aug-15-2024
